D部門英文誌過去18ヶ月以内論文リスト

★★ 電気学会D部門英文論文誌の引用文献用データの御案内(2018.7.15)★★

          産業応用部門 英文論文誌論文委員会 編修長 大石潔
-----------------------------------

 電気学会D部門英文論文誌(IEEJ Journal of Industry Applications)の過去
18ヶ月以内に発行されました論文を下記に示します。皆様がIEEE論文誌や国際
会議などのWeb of Scienceに該当する学会誌や国際会議に投稿する際に、投稿
論文における参考文献としてご活用のほどをお願い申し上げます。なお、電気
学会D部門英文論文誌(IEEJ Journal of Industry Applications)は、以下のリ
ンクからアクセス可能です(ID・パスワード不要、フリーダウンロード)。

https://www.jstage.jst.go.jp/browse/ieejjia

1)Atsushi Yao, Shunya Odawara, and Keisuke Fujisaki “Iron Loss and Hysteretic Properties under PWM Inverter Excitation at High Ambient Temperatures,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 298-304, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_298/_pdf/-char/en

2)Susumu Hara, Kikuko Miyata, Kenta Suzuki, and Masaki Tsukamoto “Effectiveness Evaluation of Updating Final-State Control for Automated Guided Vehicles Motion Control with Collision Avoidance Problems,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 358-368, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_358/_pdf/-char/en

3)C.H.H.M. Custers, J.W. Jansen, and E.A. Lomonova “Validation of a Harmonic Model for Eddy Currents in Slitted Conducting Plates,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 336-342, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_336/_pdf/-char/en

4)Baptiste Rouzier, Mehdi Hazaz, Toshiyuki Murakami, and Weiliang Xu “Application of Active Driving Assist to Remotely Controlled Car in Collision Avoidance,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 289-297, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_289/_pdf/-char/en

5)Kenshi Matsuo, Takeshi Miura, and Katsubumi Tajima “Precise Position Control of a Stepping Motor in Micro-step Drive Using Pre-compensator,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 369-370, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_369/_pdf/-char/en

6)Yuichiro Yamanaka, Masami Nirei, Mitsuhide Sato, Hironobu Murata, Yinggang Bu, and Tsutomu Mizuno “Design of a Linear Synchronous Generator and Examination of the Driving Range for a Free-Piston Engine Linear Generator System,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 351-357, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_351/_pdf/-char/en

7)Mitsuhide Sato, Masami Nirei, Yuichiro Yamanaka, Hironobu Murata, Yinggang Bu, and Tsutomu Mizuno “Operation Range of Generation Braking Force to Achieve High Efficiency Considering Combustion in a Free-Piston Engine Linear Generator System,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 343-350, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_343/_pdf/-char/en

8)T.A. van Beek, J.W. Jansen, B.L.J. Gysen, and E.A. Lomonova “Electromagnetic and Mechanical Performance of Direct and Indirectly Liquid-cooled Coreless Linear Motors with Multi-layer Coils,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 329-335, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_329/_pdf/-char/en

9)Atsushi Yao, Kouhei Tsukada, and Keisuke Fujisaki “Investigating Iron Loss Properties in an Amorphous Ring Excited by Inverters based on Silicon and Gallium Nitride,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 321-328, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_321/_pdf/-char/en

10)Toshiko Nakagawa and Taiki Takada “Magnetic Levitation of 0.1-mm-thick Steel Plate Considering its Flexibility and Inductance Characteristics,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 314-320, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_314/_pdf/-char/en

11)Yuji Shindo, Akihisa Kameari, Kengo Sugahara, and Tetsuji Matsuo “Dynamical Model of an Electromagnet using Cauer Ladder Network Representation of Eddy-current Fields,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 305-313, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_305/_pdf/-char/en

12)Mai Uenaka, Yuya Tanaka, and Akinu Nakabayashi “Design Approach of Non-Isolated Converters with Passive Soft Switching,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 371-377, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_371/_pdf/-char/en

13)Yue Yu, Keisuke Masumoto, Keiji Wada, Yuichi Kado”A DC Power Distribution System in a Data Center using a Triple Active Bridge DC-DC Converter”IEEJ J.Industry Applications, vol. 7,no .3, pp. 202-209, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_202/_pdf/-char/en

14)Rene Barrera-Cardenas, Takanori Isobe, Marta Molinas”A Meta-Parameterized Approach for the Evaluation of Semiconductor Technologies”IEEJ J.Industry Applications, vol. 7,no .3, pp. 210-217, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_210/_pdf/-char/en

15)Koji Yamaguchi, Kenshiro Katsura, Tatsuro Yamada, Yukihiko Sato”Comprehensive Study on Gate Driver for SiC-MOSFETs with Gate Boost”IEEJ J.Industry Applications, vol. 7,no .3, pp. 218-228, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_218/_pdf/-char/en

16)Yukiko Osawa, Seiichiro Katsura”Sensing of Heat Source in a Deep Layer by Considering Heat Propagation”IEEJ J.Industry Applications, vol. 7,no .3, pp. 229-235, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_229/_pdf/-char/en

17)Yuuki Inoue, Seiichiro Katsura”Spatial Disturbance Suppression of a Flexible System Based on Wave Model”IEEJ J.Industry Applications, vol. 7,no .3, pp. 236-243, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_236/_pdf/-char/en

18)Shin’ichi Osada, Tomoyuki Shimono, Takahiro Mizoguchi, Kouhei Ohnishi”Active Motion Evaluation by Mechanical Power Factor Analysis Based on Specific Frequency Component”IEEJ J.Industry Applications, vol. 7,no .3, pp. 244-249, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_244/_pdf/-char/en

19)Kodai Umeda, Tomoki Sakuma, Kenta Tsuda, Sho Sakaino, Toshiaki Tsuji”Reaction Force Estimation of Electro-hydrostatic Actuator Using Reaction Force Observer”IEEJ J.Industry Applications, vol. 7,no .3, pp. 250-258, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_250/_pdf/-char/en

20)Takuya Noguchi, Sakahisa Nagai, Atsuo Kawamura”Electromagnetic Linear Actuator providing High Force Density per Unit Area without Position Sensor as a Tactile Cell”IEEJ J.Industry Applications, vol. 7,no .3, pp. 259-265, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_259/_pdf/-char/en

21)Hiroyasu Kobayashi, Keiichiro Kondo, Tetsuya Iwasaki, Akihiro Tsumura”Experimental Study on Increasing Regenerative Power by Improving Regenerative Brake Control of Rail Vehicles in DC-electrified Railways”IEEJ J.Industry Applications, vol. 7,no .3, pp. 266-267, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_266/_pdf/-char/en

22)Jongwon Heo, Keiichiro Kondo”Maximum Continuous Operation Time Control of PMSM with Compressor Loads of Air Conditioners under DC Power Supply Loss”IEEJ J.Industry Applications, vol. 7,no .3, pp. 268-269, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_268/_pdf/-char/en

23)Masahiro Aoyama, Kazukiyo Nakajima, Toshihiko Noguchi”Proposal and Preliminary Experimental Verification of Electrically Reversal Magnetic Pole Type Variable Magnetic Flux PM Motor”IEEJ J.Industry Applications, vol. 7,no .3, pp. 270-281, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_270/_pdf/-char/en

24)Makoto Kanemaru, Mitsuru Tsukima, Toshihiko Miyauchi, Kazufumi Hayashi”Bearing Fault Detection in Induction Machine Based on Stator Current Spectrum Monitoring”IEEJ J.Industry Applications, vol. 7,no .3, pp. 282-288, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_282/_pdf/-char/en

25)Van-Duc Doan, Hiroshi Fujimoto, Takafumi Koseki, Tomio Yasuda, Hiroyuki Kishi, and Toshiyuki Fujita”CSimultaneous Optimization of Speed Profile and Allocation of Wireless Power Transfer System for Autonomous Driving Electric Vehicles,” IEEJ J.Industry Applications, vol. 7,no .2, pp. 189-201, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_189/_pdf/-char/en

26)Muhammad Hazarul Azmeer bin Ab Malek, Hiroaki Kakigano, and Kiyotsugu Takaba”Combined Pulse-Width Modulation of Dual Active Bridge DC-DC Converter to Increase the Efficiency of Bidirectional Power Transfer,”IEEJ J. Industry Applications, vol. 7, no. 2, pp. 166-174, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_166/_pdf/-char/en

27)Naoki Fujieda, Takumi Shinohara, Shuichi Ichikawa, Yuhki Sakaguchi, Shunsuke Matsuoka, and Hideki Kawaguchi”Attenuation Model for Error Correction of Ultrasonic Positioning System,”IEEJ J. Industry Applications, vol. 7, no. 2, pp. 181-188, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_181/_pdf/-char/en

28)Ryo Hanaoka, Takahiro Nozaki, and Toshiyuki Murakami”Translation and Inclination Control for Intelligent Tension Pole Based on Mode Decoupling Method,”IEEJ J. Industry Applications, vol. 7, no. 2, pp. 158-165, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_158/_pdf/-char/en

29)Shuhei Akutsu, Hiromu Sekiguchi, Takahiro Nozaki, and Toshiyuki Murakami”Position and Torque Sensorless Motion Transmission Using Voltage Compensation,”IEEJ J. Industry Applications, vol. 7, no. 2, pp. 150-157, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_150/_pdf/-char/en

30)Yoshihiro Maeda, and Makoto Iwasaki”Feedforward Friction Compensation Using the Rolling Friction Model for Micrometer-stroke Point-to-point Positioning Motion,”IEEJ J. Industry Applications, vol. 7, no. 2, pp. 141-149, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_141/_pdf/-char/en

31)Tom Oomen”Advanced Motion Control for Precision Mechatronics: Control, Identification, and Learning of Complex Systems,”IEEJ J. Industry Applications, vol. 7, no. 2, pp. 127-140, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_127/_pdf/-char/en

32)Hiroshi Nakamura, Kiyoshi Ohishi, Yuki Yokokura, Naoki Kamiya, Toshimasa Miyazaki, and Akifumi Tsukamoto”Force Sensorless Fine Force Control Based on Notch-Type Friction-Free Disturbance Observers,”IEEJ J. Industry Applications, vol. 7, no. 2, pp. 117-126, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_117/_pdf/-char/en

33)Wataru Ohnishi, Hiroshi Fujimoto, Pai-Hsueh Yang, Ping-Wei Chang, Bausan Yuan, Koichi Sakata, and Atsushi Hara”Acoustic Wave Equation Based Modeling and Collocated Side Vibration Cancellation for Pneumatic Cylinder,”IEEJ J. Industry Applications, vol. 7, no. 2, pp. 109-116, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_109/_pdf/-char/en

34)Masayuki Kato, and Katsuhiro Hirata”Characteristic Evaluation of Linear Resonant Actuator Utilizing Electrical Resonance,”IEEJ J. Industry Applications, vol. 7, no. 2, pp. 175-180, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_175/_pdf/-char/en

35)Takahiro Koyama, Kazuhiro Umetani, and Eiji Hiraki”Design Optimization Method for the Load Impedance to Maximize the Output Power in Dual Transmitting Resonator Wireless Power Transfer System,” IEEJ J. Industry Applications, vol. 7, no. 1, pp. 49-55, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_49/_pdf/-char/en

36)Tatsuya Yamamoto, Yinggang Bu, Tsutomu Mizuno, Yutaka Yamaguchi, and Tomoyoshi Kano”Loss Reduction of Transformer for LLC Resonant Converter Using a Magnetoplated Wire,”IEEJ J. Industry Applications, vol. 7, no. 1, pp. 43-48, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_43/_pdf/-char/en

37)Tomohide Shirakawa, Genki Yamasaki, Kazuhiro Umetani, and Eiji Hiraki”Extremum Co-Energy Principle for Analyzing AC Current Distribution in Parallel-Connected Wires of High-Frequency Power Inductors,”IEEJ J. Industry Applications, vol. 7, no. 1, pp. 35-42, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_35/_pdf/-char/en

38)Toru Tanaka, Yoshinori Takahashi, Kenji Natori, and Yukihiko Sato”High-Efficiency Floating Bidirectional Power Flow Controller for Next-Generation DC Power Network,” IEEJ J. Industry Applications, vol. 7, no. 1, pp. 29-34, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_29/_pdf/-char/en

39)Van-Duc Doan, Hiroshi Fujimoto, Takafumi Koseki, Tomio Yasuda, Hiroyuki Kishi, and Toshiyuki Fujita”Iterative Dynamic Programming for Optimal Control Problem with Isoperimetric Constraint and Its Application to Optimal Eco-driving Control of Electric Vehicle,”IEEJ J. Industry Applications, vol. 7, no. 1, pp. 80-92, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_80/_pdf/-char/en

40)Toshiaki Tsuji, Kyo Kutsuzawa, and Sho Sakaino,”Optimized Trajectory Generation based on Model Predictive Control for Turning Over Pancakes,”IEEJ J. Industry Applications, vol. 7, no. 1, pp. 22-28, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_22/_pdf/-char/en

41)Takashi Kai, Hiroyuki Sekiguchi, and Hidetoshi Ikeda”Relative Vibration Suppression in a Positioning Machine Using Acceleration Feedback Control,” IEEJ J. Industry Applications, vol. 7, no. 1, pp. 15-21, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_15/_pdf/-char/en

42)Thao Tran Phuong, Kiyoshi Ohishi, Chowarit Mitsantisuk, Yuki Yokokura, Kouhei Ohnishi, Roberto Oboe, and Asif Sabanovic”Disturbance Observer and Kalman Filter Based Motion Control Realization,” IEEJ J. Industry Applications, vol. 7, no. 1, pp. 1-14, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_1/_pdf/-char/en

43)Hamin Song, and Shinji Doki”Evaluation Method to Estimate Position Control Error in Position Sensorless Control Based on Pattern Matching Method,”IEEJ J. Industry Applications, vol. 7, no. 1, pp. 73-79, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_73/_pdf/-char/en

44)Kazuki Hirono, Reona Hoshino, Tsuyoshi Kamiya, Shinji Wakao, Yoshifumi Okamoto, and Woojin Jeon”Design Optimization of Primary Core in Induction Heating Roll by the Combination of 2D Level-set Method and 3D Coupled Magnetic-Thermal FEM,” IEEJ J. Industry Applications, vol. 7, no. 1, pp. 64-72, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_64/_pdf/-char/en

45)Hiroyuki Kaimori, and Kan Akatsu”Behavior Modeling of Permanent Magnet Synchronous Motors Using Flux Linkages for Coupling with Circuit Simulation, IEEJ J. Industry Applications, vol. 7, no. 1, pp. 56-63, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_56/_pdf/-char/en

46)Hiromu Norizuki, and Yutaka Uchimura”Contact Prediction Control for a Teleoperation System with Time Delay,”IEEJ J. Industry Applications, vol. 7, no. 1, pp. 102-108, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_102/_pdf/-char/en

47)Wataru Ohnishi, and Hiroshi Fujimoto”Perfect Tracking Control Method by Multirate Feedforward and State Trajectory Generation based on Time Axis Reversal,”IEEJ J. Industry Applications, vol. 7, no. 1, pp. 93-101, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_93/_pdf/-char/en

48)Giorgio Lovison, Daita Kobayashi, Motoki Sato, Takehiro Imura, and Yoichi Hori”Secondary-side-only Control for High Efficiency and Desired Power with Two Converters in Wireless Power Transfer Systems,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 473-481, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_473/_pdf

49)Shota Kimura, Kimihiro Nanamori, Taichi Kawakami, Jun Imaoka, and Masayoshi Yamamoto”Allowable Power Analysis and Comparison of High Power Density DC-DC Converters with Integrated Magnetic Components,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 463-472, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_463/_pdf

50)Yichen Zhou, Yonggang Li, and Jiaomin Liu”Complete Models of Transmission-connected Photovoltaic Plant Using Modularity Principle for Power System Small Signal Stability Study,Q”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 435-442, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_435/_pdf

51)Zhang Haifeng, and Wang Peng”Design of an LCC Resonant Converter for Furnace Power Supply during Electron Bean Melting,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 387-394, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_387/_pdf

52)Kichiro Yamamoto, Sho Ehira, and Minoru Ikeda”Synchronous Frame Control for Voltage Sag/Swell Compensator Utilizing Single-Phase Matrix Converter,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 353-361, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_353/_pdf

53)Hideaki Hirahara, Akira Tanaka, Shu Yamamoto, and Takahiro Ara”Systematic Design of Two-Degree-of-Freedom PID Controller for Positioning and Tracking Drives of Linear Servo Motors,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 443-448, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_443/_pdf

54)Yusuke Oki, Tomoyuki Ogawa, and Jun’ichiro Kawaguchi”Train Power Demand Control Using Decentralized and Parallel Control Scheme,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 482-489, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_482/_pdf

55)Hiroya Sugimoto, Itsuki Shimura, and Akira Chiba”Principle and Test Results of Energy-Saving Effect of a Single-Drive Bearingless Motor in Cooling Fan Applications,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 456-462, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_456/_pdf

56)Masafumi Fujita, Takaaki Hirose, Takashi Ueda, Hiroyuki Ishizuka, Masashi Okubo, Ken Nagakura, and Tadashi Tokumasu”Inter-strand Circulating Current Analysis of End-region Transposed Coil of Power Generator using 3D Multi-layer FEM,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 449-455, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_449/_pdf

57)Ufot Ufot Ekong, Mamiko Inamori, and Masayuki Morimoto”Instantaneous Vector Control of Four Switch Three Phase Inverter Fed Induction Motor Drive,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 429-434, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_429/_pdf

58)Thanh Anh Huynh, and Min-Fu Hsieh”Performance Evaluation of Interior Permanent Magnet Motors Using Thin Electrical Steels,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 422-428, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_422/_pdf

59)Takeo Ishikawa, Taiki Watanabe, and Nobuyuki Kurita”Effect of Cleaning Level on Topology Optimization of Permanent Magnet Synchronous Generator,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 416-421, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_416/_pdf

60)Kenta Yamano, Shigeo Morimoto, Masayuki Sanada, and Yukinori Inoue”Design of Surface Permanent Magnet Synchronous Motor Using Design Assist System for PMSM,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 409-415, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_409/_pdf

61)Yuki Shimizu, Shigeo Morimoto, Masayuki Sanada, and Yukinori Inoue”Influence of Permanent Magnet Properties and Arrangement on Performance of IPMSMs for Automotive Applications,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 401-408, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_401/_pdf

62)Hirokatsu Katagiri, Hiroyuki Sano, Kazuki Semba, Noriyo Mimura, and Takashi Yamada”Fast Calculation of AC Copper Loss for High Speed Machines by Zooming Method,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 395-400, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_395/_pdf

63)Shin Kusase, and Kazumi Kurihara”A Proposal for a New Variable Leakage Flux Motor with Interpolar Gap and Permanent Magnets,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 381-386, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_381/_pdf

64)Soumitra Kunte, Mandar Bhawalkar, N. Gopalakrishnan, and Yogesh Nerkar”Optimal Design and Comparative Analysis of Different Configurations of Brushless Doubly Fed Reluctance Machine,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 370-380, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_370/_pdf

65)Katsumi Yamazaki, Ren Suzuki, Motoharu Nuka, and Makoto Masegi”Characteristics Analysis of Claw-Pole Alternator for Automobiles by Nonlinear Magnetic Field Decomposition for Armature Reaction,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 362-369, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_362/_pdf

66)Nicolas Denis, Yenyi Wu, and Keisuke Fujisaki”Impact of the Inverter DC Bus Voltage on the Iron Losses of a Permanent Magnet Synchronous Motor at Constant Speed,””IEEJ J. Industry Applications, vol. 6, no. 6, pp. 346-352, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_346/_pdf

67)Kenta Motoyoshi, Haruyuki Kometani, Nobuyuki Sora, and Susumu Maeda”Large-Scale 3D Electromagnetic Field Analysis for Estimation of Stator End Region Loss in Turbine Generators,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 340-345, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_340/_pdf

68)Aviti Mushi, Sakahisa Nagai, Hidemine Obara, and Atsuo Kawamura”Fast and Robust Nonlinear Deadbeat Current Control for Boost Converter,”IEEJ J. Industry Applications, vol. 6, no. 5, pp. 311-319, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/5/6_311/_pdf

69)Mitsumasa Ushiroda, Takaaki Wakimoto, Hiroaki Yamada, Toshihiko Tanaka, Masayuki Okamoto, and Koji Kawahara”Voltage Rise Suppression and Load Balancing by PV-PCS with Constant DC-Capacitor Voltage-Control-Based Strategy in Single-Phase Three-Wire Distribution Feeders,”IEEJ J. Industry Applications, vol. 6, no. 5, pp. 303-310, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/5/6_303/_pdf

70)Kenta Tsuda, Tomoki Sakuma, Kodai Umeda, Sho Sakaino, and Toshiaki Tsuji”Resonance-suppression Control for Electro-hydrostatic Actuator as Two-inertia System,”IEEJ J. Industry Applications, vol. 6, no. 5, pp. 320-327, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/5/6_320/_pdf

71)Keisuke Kusaka, and Jun-ichi Itoh”Development Trends of Inductive Power Transfer Systems Utilizing Electromagnetic Induction with Focus on Transmission Frequency and Transmission Power,”IEEJ J. Industry Applications, vol. 6, no. 5, pp. 328-339, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/5/6_328/_pdf

72)Yusuke Hayashi, Yoshikatsu Matsugaki, and Tamotsu Ninomiya”Capacitively Isolated Multicell Dc-Dc Transformer for Future Dc Distribution System,”IEEJ J. Industry Applications, vol. 6, no. 4, pp. 268-277, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/4/6_268/_pdf

73)Mohammad Bani Shamseh, Teruo Yoshino, and Atsuo Kawamura”Load Current Distribution between Parallel Inverters based on Capacitor Voltage Control for UPS Applications,”IEEJ J. Industry Applications, vol. 6, no. 4, pp. 258-267, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/4/6_258/_pdf

74)Baptiste Rouzier, and Toshiyuki Murakami”Line Crossing Assistance Based on Situation Modulated Potentials Using Stereo Camera Detection,”IEEJ J. Industry Applications, vol. 6, no. 4, pp. 286-294, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/4/6_286/_pdf

75)Masahide Ito, Kazuyoshi Kawatsu, and Masaaki Shibata”Kinematic Control of Redundant Manipulators for Admitting Joint Range of Motion Maximally,”IEEJ J. Industry Applications, vol. 6, no. 4, pp. 278-285, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/4/6_278/_pdf

76)Yuefei Gao, and Hajime Nobuhara”A Decentralized Trusted Timestamping Based on Blockchains,”IEEJ J. Industry Applications, vol. 6, no. 4, pp. 252-257, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/4/6_252/_pdf

77)Koichiro Iwaoka, and Yuzo Hirotsu”Failure Detection Method using Aggregated Vehicle Detector Data,”IEEJ J. Industry Applications, vol. 6, no. 4, pp. 295-302, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/4/6_295/_pdf

78)Toshiki Nakanishi, and Jun-ichi Itoh,”Design Guidelines of Circuit Parameters for Modular Multilevel Converter with H-bridge Cell”,IEEJ J. Industry Applications, vol.6, no.3, pp.231-244, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_231/_pdf

79)Tomio Sato, Masahide Marumo, and Tetsuya Akitsu,”Lamb-Wave Resonator Oscillator Powered by Inductive Compensation of Stray-Capacitance CMOS Inverter”,IEEJ J. Industry Applications, vol.6, no.3, pp.213-222, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_213/_pdf

80)Hiroshi Shinoda, and Takahide Terada,”Insulated Signal Transmission System with Near-field Resonant Coupler to Drive High-voltage Power Devices”,IEEJ J. Industry Applications, vol.6, no.3, pp. 205-212, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_205/_pdf

81)Hiroki Murata, and Seiichiro Katsura,”Improvement of Operationality Under Time Varying Delay for Bilateral Teleoperation Systems by Differential Signal Based Data Modulation”,IEEJ J. Industry Applications, vol.6, no.3, pp.245-251, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_245/_pdf

82)Sho Sakaino, Hiroyuki Kawajiri, and Toshiaki Tsuji,”Determination of Torque Distribution Ratio for Electric Bicycle with Independently Driven Front and Rear Wheels”,IEEJ J. Industry Applications, vol.6, no.3, pp.223-230, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_223/_pdf

83)Takenori Atsumi,”Estimation Method of Unobservable Oscillations in Sampled-Data Positioning Systems”,IEEJ J. Industry Applications, vol.6, no.3, pp. 199-204,2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_199/_pdf

84)Hisayoshi Muramatsu, and Seiichiro Katsura,”Design of an Infinite-Order Disturbance Observer Enhancing Disturbance Suppression Performance”,IEEJ J. Industry Applications, vol.6, no.3, pp.192-198, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_192/_pdf

85)Ryota Takahashi, Kiyoshi Ohishi, Yuki Yokokura, Hitoshi Haga, and Tenjiroh Hiwatari,”Stationary Reference Frame Position Sensorless Control Based on Stator Flux Linkage and Sinusoidal Current Tracking Controller for IPMSM”,IEEJ J. Industry Applications, vol.6, no.3, pp.181-191, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_181/_pdf

86)Ryo Tanabe, and Kan Akatsu,”Advanced Torque Control of Permanent Magnet Synchronous Motor Using Finite Element Analysis Based Motor Model with a Real-time Simulator”,IEEJ J. Industry Applications, vol.6, no.3, pp.173-180, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_173/_pdf

87)Kosuke Kondo, and Shinji Doki,”Position Estimation System for PMSM Position Sensorless Control in Inverter Overmodulation Drive”,IEEJ J. Industry Applications, vol.6, no.3, pp.165-172, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_165/_pdf

88)Duy-Dinh Nguyen, Duc Tuyen Nguyen, and Goro Fujita,”New Modulation Strategy Combining Phase Shift and Frequency Variation for Dual-Active-Bridge Converter”,IEEJ J. Industry Applications, vol.6, no.2, pp.140-150, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_140/_pdf

89)Hiroyuki Kitamura, Sho Sakaino, and Toshiaki Tsuji,”Contact Point Calculation on a Haptic Interface Utilizing Differentiated Force”,IEEJ J. Industry Applications, vol.6, no.2, pp.151-159, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_151/_pdf

90)Takumi Kurosawa, and Yasutaka Fujimoto,”Torque Sensorless Control for an Electric Power Assisted Bicycle with Instantaneous Pedaling Torque Estimation”,IEEJ J. Industry Applications, vol.6, no.2, pp.124-129, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_124/_pdf

91)Yoshiyuki Urakawa,”Lens Position Control System Using Limited Pole Placement Method”,IEEJ J. Industry Applications, vol.6, no.2, pp.117-123, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_117/_pdf

92)Asif ?abanovi?,”Challenges in Motion Control Systems”,IEEJ J. Industry Applications, vol.6, no.2, pp.107-116, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_107/_pdf

93)Noriaki Hirose, and Ryosuke Tajima,”Deadbeat Feedforward Compensation with Frequency Shaping of Position Feedforward Controller”,IEEJ J. Industry Applications, vol.6, no.2, pp.100-106, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_100/_pdf

94)Keisuke Yoshida, Kiyoshi Ohishi, Toshimasa Miyazaki, Yuki Yokokura, and Junichi Fukui,”Full FPGA Tracking Control System Based on Error-Based Communication Disturbance Observer Considering Time Delay for Optical Disc System”,IEEJ J. Industry Applications, vol.6, no.2, pp.91-99, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_91/_pdf

95)Yusuke Asai, Yuki Yokokura, and Kiyoshi Ohishi,”Mechanical Admittance Realization Control Based on Feedforward Compensation for Fine Realization of Impedance”,IEEJ J. Industry Applications, vol.6, no.2, pp.83-90, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_83/_pdf

96)Yoshiaki Seki, Kiyoshi Ohishi, Yuki Yokokura, Toshiki Sano, Yuji Ide, Daigo Kuraishi, and Akihiko Takahashi,”Robust Positioning Control Using α-β Stationary Frame Current Controller and Disturbance Torque Hybrid Observer”,IEEJ J. Industry Applications, vol.6, no.2, pp.73-82, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_73/_pdf

97)Sho Masuyama, Takuya Noguchi, and Atsuo Kawamura,”Electromagnetic Linear Actuator with Two Stators and One Rotor for Tactile Display”,IEEJ J. Industry Applications, vol.6, no.2, pp.160-164, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_160/_pdf

98)Keiichi Katsuta, Kenji Imamoto, and Hiroyuki Tani,”Ring Topology Railway Signalling with Information Sharing among Onboard and Switch Controllers”,IEEJ J. Industry Applications, vol.6, no.2, pp.130-139, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_130/_pdf

99)Toshiki Nakanishi, and Jun-ichi Itoh,”Control Strategy for Modular Multilevel Converter based on Single-phase Power Factor Correction Converter”,IEEJ J. Industry Applications, vol.6, no.1, pp.46-57, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/1/6_46/_pdf

100)Koyo Yu, Takuya Matsunaga, Hiromasa Kawana, Shin Usuda, and Kouhei Ohnishi,”Frequency-Based Analysis of the Relationship between Cutting Force and CT Number for an Implant-Surgery-Teaching Robot”,IEEJ J. Industry Applications, vol.6, no.1, pp.66-72, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/1/6_66/_pdf

101)Kei Matsuura, Yousuke Akama, Kodai Abe, Kiyoshi Ohishi, Hitoshi Haga, and Itaru Ando,”Fine Three-Phase Current Reconstruction based on Calculating the Phase-Shifted Voltage Reference Using Only the DC Current Sensor of an Inverter and Its Application to a PM Motor Drive”,IEEJ J. Industry Applications, vol.6, no.1, pp.58-65, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/1/6_58/_pdf

102)Yosuke Nakayama, Atsushi Matsumoto, and Masaru Hasegawa,”Position Sensorless Control System within Over-modulation Range Based on Mathematical Model Robust against Magnetic Saturation of IPMSMs”,IEEJ J. Industry Applications, vol.6, no.1, pp.36-45, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/1/6_36/_pdf

103)Akira Satake, Yuriko Okamoto, and Satoru Kato,”Design of Coupling Cancellation Control for a Double-winding PMSM”,IEEJ J. Industry Applications, vol.6, no.1, pp.29-35, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/1/6_29/_pdf

104)Kazuto Sakai, and Kouki Matsuda,”Permanent Magnet Motor with Reversible Salient Poles and Variable Magnetic Force”,I,EEJ J. Industry Applications, vol.6, no.1, pp.19-28, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/1/6_19/_pdf

105)Atsushi Shinohara, Yukinori Inoue, Shigeo Morimoto, and Masayuki Sanada,”Correction Method of Reference Flux for Maximum Torque per Ampere Control in Direct-Torque-Controlled IPMSM Drives”,IEEJ J. Industry Applications, vol.6, no.1, pp.12-18, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/1/6_12/_pdf

106)Kodai Abe, Hitoshi Haga, Kiyoshi Ohishi, and Yuki Yokokura,”Current Ripple Suppression Control Based on Prediction of Resonance Cancellation Voltage for Electrolytic-Capacitor-Less Inverter”,IEEJ J. Industry Applications, vol.6, no.1, pp.1-11, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/1/6_1/_pdf

107)Hiroki Ishida, Hiroto Furukawa, and Tomoaki Kyoden,”Development of Design Methodology for 60Hz Wireless Power Transmission System”,IEEJ J. Industry Applications, vol.5, no.6, pp.429-438, 2016.

https://www.jstage.jst.go.jp/article/ieejjia/5/6/5_429/_pdf

108)Hitoshi Haga, Kenta Sayama, Kiyoshi Ohishi, and Takayuki Shimizu,”Fine Voltage Control Based on Frequency Separation Two-Degrees-of-Freedom Control for Single-Phase Inverter”,IEEJ J. Industry Applications, vol.5, no.6, pp.413-421, 2016.

https://www.jstage.jst.go.jp/article/ieejjia/5/6/5_413/_pdf

109)Akihiro Hino, and Keiji Wada,”Resonance Analysis Focusing on Stray Inductance and Capacitance of Laminated Bus Bars”,IEEJ J. Industry Applications, vol.5, no.6, pp.407-412, 2016.

https://www.jstage.jst.go.jp/article/ieejjia/5/6/5_407/_pdf

110)Yuki Yokokura, Yusuke Asai, and Kiyoshi Ohishi,”Fine Reproduction of Haptic Sensations for High-Stiffness Environment Considering Mechanical Admittance”,IEEJ J. Industry Applications, vol.5, no.6, pp.439-440, 2016.

https://www.jstage.jst.go.jp/article/ieejjia/5/6/5_439/_pdf

111)Daisuke Yashiro, Kazuhiro Yubai, and Satoshi Komada,”Fast Estimation of Environment’s Stiffness for Bilateral Control Systems with Communication Delay”,IEEJ J. Industry Applications, vol.5, no 6, pp.422-428, 2016.

https://www.jstage.jst.go.jp/article/ieejjia/5/6/5_422/_pdf

※電気学会D部門英文論文誌(IEEJ Journal of Industry Applications)は、隔月での発行となります。

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━