List of recent papers in IEEJ Journal of Industry Application for your reference

List of recent papers in IEEJ Journal of Industry Application for your reference (2019.2.15)

          Editor in Chief, IEEJ Journal of Industry Application

Kiyoshi Ohishi

———————————————————————————–

We are pleased to inform you a list of papers in two years of IEEJ Journal of Industry Applications. This list can help you to make a paper when you submit it to the international conferences, and/or to the Journal of Power Electronics, and/ or to the IEEE transactions. Please copy and paste the following reference when you refer the paper.

Now, papers in IEEJ Journal of Industry Applications are able to free download from the website:

 https://www.jstage.jst.go.jp/browse/ieejjia

1)Hiroki Ishida, Tomoaki Kyoden, and Hiroto Furukawa”Effectiveness of Convolutional Perfectly Matched Layer in Time-domain Numerical Analysis of Low-frequency Wireless Power Transfer,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 131-139, 2019.

https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_131/_pdf

2)Kei Nishikawa, Fuka Ikeda, Hiroaki Yamada, Toshihiko Tanaka, and Masayuki Okamoto”Constant DC-Capacitor Voltage-Control-Based Strategy for Harmonics Compensation in Smart Charger for Electric Vehicles in Single-Phase Three-Wire Distribution Feeders With Reactive Power Control,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 116-123, 2019. 

https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_116/_pdf

3)Satoshi Nagai and Jun-ichi Itoh”Open-loop-based Island-mode Voltage Control Method for Single-phase Grid-tied Inverter with Minimized LC Filter,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 108-115, 2019.

https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_108/_pdf

4)Muhammad Hazarul Azmeer bin Ab Malek, Hiroaki Kakigano, and Kiyotsugu Takaba”Dual Active Bridge DC?DC Converter with Tunable Dual Pulse-Width Modulation for Complete Zero Voltage Switching Operation,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 98-107, 2019.

https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_98/_pdf

5)Hoai Nam Le and Jun-ichi Itoh”Discontinuous Current Mode Control for Minimization of Three-phase Grid-Tied Inverters in Photovoltaic System,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 90-97, 2019. 

https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_90/_pdf

6)Giorgio Lovison, Takehiro Imura, Hiroshi Fujimoto, and Yoichi Hori”Secondary-side-only Phase-shifting Voltage Stabilization Control with a Single Converter for WPT Systems with Constant Power Load,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 66-74, 2019.

https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_66/_pdf

7)Yoshihiro Miwa, Toshihisa Shimizu, Koushi Takano, and Hitoshi Ishii”Calculating the Iron Losses in Gapped Inductors Using the Loss-Map Method,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 57-65, 2019.

https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_57/_pdf

8)Tatsuya Yamamoto, Yasuyuki Konno, Kanako Sugimura, Toshiro Sato, Yinggang Bu, and Tsutomu Mizuno”Loss Reduction of LLC Resonant Converter using Magnetocoated Wire,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 51-56, 2019.

https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_51/_pdf

9)Tetsuji Daido and Yoichi Hayashi”Output Voltage Error Compensation for Every Half of a Carrier Period in a Voltage Source Inverter,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 41-50, 2019. 

https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_41/_pdf

10)Fuka Ikeda, Toshihiko Tanaka, Hiroaki Yamada, and Masayuki Okamoto”Simple Harmonics Compensation Method for Smart Charger With Constant DC-Capacitor Voltage-Control for Electric Vehicles in Single-Phase Three-Wire Distribution Feeders,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 23-32, 2019.

https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_23/_pdf

11)Koji Orikawa, Takeshi Kinomae, and Jun-ichi Itoh”Experimental Verification of Self-Supplying Power Circuit using One-Turn Transformer for Gate Drive Unit,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 12-22, 2019.

https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_12/_pdf

12)Norio Miyauchi”Reduction of the Power Consumption of a Stepping Motor for Driving the Hands of Wristwatches,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 140-141, 2019. 

https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_140/_pdf

13)Douglas Martins Araujo, Faguy Tamwo Simo, and Yves Perriard”General Sensorless Method with Parameter Identification and Double Kalman Filter Applied to a Bistable Fast Linear Switched Reluctance Actuator for Textile Machine,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 33-40, 2019. 

https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_33/_pdf

14)Lazhar Ben-Brahim, Adel Gastli, Teruo Yoshino, Tomoki Yokoyama, and Atsuo Kawamura”Review of Medium Voltage High Power Electric Drives,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 1-11, 2019.

https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_1/_pdf

15)Norio Miyauchi”Reduction of the Power Consumption of a Stepping Motor for Driving the Hands of Wristwatches,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 140-141, 2019. 

https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_140/_pdf

16)Douglas Martins Araujo, Faguy Tamwo Simo, and Yves Perriard”General Sensorless Method with Parameter Identification and Double Kalman Filter Applied to a Bistable Fast Linear Switched Reluctance Actuator for Textile Machine,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 33-40, 2019. 

https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_33/_pdf

17)Lazhar Ben-Brahim, Adel Gastli, Teruo Yoshino, Tomoki Yokoyama, and Atsuo Kawamura”Review of Medium Voltage High Power Electric Drives,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 1-11, 2019.

https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_1/_pdf

18)Kazuhiro Shirakawa, Kazuyoshi Obayashi, Hiroshi Taki, Masami Fujitsuna, and Toshihisa Shimizu”Z-matched Active Common-mode Canceller for the Suppression of Common-mode Current in an Inverter System,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 142-151, 2019. 

https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_142/_pdf

19)Yusuke Hayashi and Tamotsu Ninomiya”Highly Scalable Sensorless Multicellular AC-DC Transformer (ADX) for the DC Distribution System in Data Centers,”IEEJ J. Industry Applications, vol. 7, no. 6, pp.  479-487, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/6/7_479/_pdf

20)Katsuya Nomura, Takashi Kojima, and Yoshiyuki Hattori”Straightforward Modeling of Complex Permeability for Common Mode Chokes,”IEEJ J. Industry Applications, vol. 7, no. 6, pp. 462-472, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/6/7_462/_pdf

21)Masaki Semasa, Toshiji Kato, and Kaoru Inoue”Simple and Effective Time Delay Compensation Method for Active Damping Control of Grid-Connected Inverter with an LCL Filter,”IEEJ J. Industry Applications, vol. 7, no. 6, pp. 454-461, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/6/7_454/_pdf

22)M.K.C. Dinesh Chinthaka and Tomoyuki Shimono”Inertia Compensation of Motion Copying System for Dexterous Object Handling,”IEEJ J. Industry Applications, vol. 7, no. 6, pp. 495-505, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/6/7_495/_pdf

23)Kenta Seki, Daisuke Noda, and Makoto Iwasaki”Dual-loop Controller Design Considering Robust Vibration Suppression in Piezo-actuated Stage Systems,”IEEJ J. Industry Applications, vol. 7, no. 6, pp. 488-494, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/6/7_488/_pdf

24)Shrinathan Esakimuthu Pandarakone, Yukio Mizuno, and Hisahide Nakamura”Online Slight Inter-Turn Short-Circuit Fault Diagnosis Using the Distortion Ratio of Load Current in a Low-Voltage Induction Motor,”IEEJ J. Industry Applications, vol. 7, no. 6, pp. 473-478, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/6/7_473/_pdf

25)Makoto Ito, Shinji Sugimoto, Akeshi Takahashi, & Shuichi Tamiya”A Narrow Bridge Structure for Reduction of the Flux Leakage,”IEEJ J. Industry Applications, vol. 7, no. 6, pp. 517-524, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/6/7_517/_pdf

26)Ben Liu, Teruo Yoshino, and Atsuo Kawamura”Seamless Control of Grid-Connected Inverter during Single Phase Disconnection after Single Phase Fault in a Weak Grid,”IEEJ J. Industry Applications, vol. 7, no. 6, pp. 506-516, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/6/7_506/_pdf

27)Koya Nishimoto, Yuichi Kado, and Keiji Wada “Implementation of Decoupling Power Flow Control System in Triple Active Bridge Converter Rated at 400V, 10kW, and 20kHz,”IEEJ J. Industry Applications, vol. 7, no. 5, pp. 410-415, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/5/7_410/_pdf

28)Hiroshi Nakao, Yu Yonezawa, Takahiko Sugawara, Yoshiyasu Nakashima, and Fujio Kurokawa “Online Degradation Detection/Prediction Method for Current Transfer Ratio of Photo-Coupler Installed in Digitally-Controlled Switching Mode Power Supply,”IEEJ J. Industry Applications, vol. 7, no. 5, pp. 403-409, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/5/7_403/_pdf

29)Jun-ya Nagase, Fumika Fukunaga, Kan Ishida, Norihiko Saga”Steering System of Cylindrical Elastic Crawler Robot,”IEEJ J. Industry Applications, vol. 7, no. 5, pp. 441-442, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/5/7_441/_pdf

30)Yasufumi Yoshiura, Shouta Kawahara, Daichi Horimai, Tetsuya Asai, and Yasuhiko Kaku “Vibration Suppression Control Using an Equivalent Rigid-Body Observer,”IEEJ J. Industry Applications, vol. 7, no. 5, pp. 396-402, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/5/7_396/_pdf

31)Takashi Ohhira, and Akira Shimada “Movement Control Based on Model Predictive Control with Disturbance Suppression using Kalman Filter including Disturbance Estimation,”IEEJ J. Industry Applications, vol. 7, no. 5, pp. 387-395, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/5/7_387/_pdf

32)Satoshi Nishimura, Yukiko Osawa, Hiroki Kurumatani, Yuki Nagatsu, Kazumasa Miura, and Seiichiro Katsura “Simultaneous Presentation of Thermal and Tactile Sensations Using Multilateral Control under Time Delay,”IEEJ J. Industry Applications, vol. 7, no. 5, pp. 378-386, 2018

https://www.jstage.jst.go.jp/article/ieejjia/7/5/7_378/_pdf

33)Kenshi Matsuo, Zheng Xiang, Takeshi Miura, and Katsubumi Tajima”Automatic Tuning of Pulse Timings Using Neural Network for Rotor Oscillation Damping of a Stepping Motor,”IEEJ J. Industry Applications, vol. 7, no. 5, pp. 443-444, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/5/7_443/_pdf

34)Tenjiro Hiwatari, Kiyoshi Ohishi, Yuki Yokokura, Haruya Kada, Sota Sano, and Akira Satake”Fast Torque Response and Reduced Pulse Width Modulation Switching Frequency Based on Model Predictive Direct Torque Control and Selective Harmonic Elimination,”IEEJ J. Industry Applications, vol. 7, no. 5, pp. 431-440, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/5/7_431/_pdf

35)Hiroshi Yoda, and Yasuaki Sakamoto”Considerations in the Numerical Design for the Armatures of LIM-Type Eddy-Current Rail Brakes,”IEEJ J. Industry Applications, vol. 7, no. 5, pp. 425-430, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/5/7_425/_pdf

36)Tsutomu Miyauchi, Kenji Imamoto, Keiko Teramura, and Hirotaka Takahashi “Evaluating the Accuracy of Railway Total Simulator Compared with Actual Measurement Data,”IEEJ J. Industry Applications, vol. 7, no. 5, pp. 416-424, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/5/7_416/_pdf

37)Akeshi Takahashi, and Wataru Hatsuse”Novel Criteria for Reluctance Torque Utility of Permanent Magnet Motors,”IEEJ J. Industry Applications, vol. 7, no. 5, pp. 445-453, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/5/7_445/_pdf

38)Atsushi Yao, Shunya Odawara, and Keisuke Fujisaki “Iron Loss and Hysteretic Properties under PWM Inverter Excitation at High Ambient Temperatures,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 298-304, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_298/_pdf/-char/en

39)Susumu Hara, Kikuko Miyata, Kenta Suzuki, and Masaki Tsukamoto “Effectiveness Evaluation of Updating Final-State Control for Automated Guided Vehicles Motion Control with Collision Avoidance Problems,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 358-368, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_358/_pdf/-char/en

40)C.H.H.M. Custers, J.W. Jansen, and E.A. Lomonova “Validation of a Harmonic Model for Eddy Currents in Slitted Conducting Plates,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 336-342, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_336/_pdf/-char/en

41)Baptiste Rouzier, Mehdi Hazaz, Toshiyuki Murakami, and Weiliang Xu “Application of Active Driving Assist to Remotely Controlled Car in Collision Avoidance,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 289-297, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_289/_pdf/-char/en

42)Kenshi Matsuo, Takeshi Miura, and Katsubumi Tajima “Precise Position Control of a Stepping Motor in Micro-step Drive Using Pre-compensator,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 369-370, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_369/_pdf/-char/en

43)Yuichiro Yamanaka, Masami Nirei, Mitsuhide Sato, Hironobu Murata, Yinggang Bu, and Tsutomu Mizuno “Design of a Linear Synchronous Generator and Examination of the Driving Range for a Free-Piston Engine Linear Generator System,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 351-357, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_351/_pdf/-char/en

44)Mitsuhide Sato, Masami Nirei, Yuichiro Yamanaka, Hironobu Murata, Yinggang Bu, and Tsutomu Mizuno “Operation Range of Generation Braking Force to Achieve High Efficiency Considering Combustion in a Free-Piston Engine Linear Generator System,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 343-350, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_343/_pdf/-char/en

45)T.A. van Beek, J.W. Jansen, B.L.J. Gysen, and E.A. Lomonova “Electromagnetic and Mechanical Performance of Direct and Indirectly Liquid-cooled Coreless Linear Motors with Multi-layer Coils,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 329-335, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_329/_pdf/-char/en

46)Atsushi Yao, Kouhei Tsukada, and Keisuke Fujisaki “Investigating Iron Loss Properties in an Amorphous Ring Excited by Inverters based on Silicon and Gallium Nitride,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 321-328, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_321/_pdf/-char/en

47)Toshiko Nakagawa and Taiki Takada “Magnetic Levitation of 0.1-mm-thick Steel Plate Considering its Flexibility and Inductance Characteristics,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 314-320, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_314/_pdf/-char/en

48)Yuji Shindo, Akihisa Kameari, Kengo Sugahara, and Tetsuji Matsuo “Dynamical Model of an Electromagnet using Cauer Ladder Network Representation of Eddy-current Fields,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 305-313, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_305/_pdf/-char/en

49)Mai Uenaka, Yuya Tanaka, and Akinu Nakabayashi “Design Approach of Non-Isolated Converters with Passive Soft Switching,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 371-377, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_371/_pdf/-char/en

50)Yue Yu, Keisuke Masumoto, Keiji Wada, Yuichi Kado”A DC Power Distribution System in a Data Center using a Triple Active Bridge DC-DC Converter”IEEJ J.Industry Applications, vol. 7,no .3, pp. 202-209, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_202/_pdf/-char/en

51)Rene Barrera-Cardenas, Takanori Isobe, Marta Molinas”A Meta-Parameterized Approach for the Evaluation of Semiconductor Technologies”IEEJ J.Industry Applications, vol. 7,no .3, pp. 210-217, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_210/_pdf/-char/en

52)Koji Yamaguchi, Kenshiro Katsura, Tatsuro Yamada, Yukihiko Sato”Comprehensive Study on Gate Driver for SiC-MOSFETs with Gate Boost”IEEJ J.Industry Applications, vol. 7,no .3, pp. 218-228, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_218/_pdf/-char/en

53)Yukiko Osawa, Seiichiro Katsura”Sensing of Heat Source in a Deep Layer by Considering Heat Propagation”IEEJ J.Industry Applications, vol. 7,no .3, pp. 229-235, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_229/_pdf/-char/en

54)Yuuki Inoue, Seiichiro Katsura”Spatial Disturbance Suppression of a Flexible System Based on Wave Model”IEEJ J.Industry Applications, vol. 7,no .3, pp. 236-243, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_236/_pdf/-char/en

55)Shin’ichi Osada, Tomoyuki Shimono, Takahiro Mizoguchi, Kouhei Ohnishi”Active Motion Evaluation by Mechanical Power Factor Analysis Based on Specific Frequency Component”IEEJ J.Industry Applications, vol. 7,no .3, pp. 244-249, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_244/_pdf/-char/en

56)Kodai Umeda, Tomoki Sakuma, Kenta Tsuda, Sho Sakaino, Toshiaki Tsuji”Reaction Force Estimation of Electro-hydrostatic Actuator Using Reaction Force Observer”IEEJ J.Industry Applications, vol. 7,no .3, pp. 250-258, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_250/_pdf/-char/en

57)Takuya Noguchi, Sakahisa Nagai, Atsuo Kawamura”Electromagnetic Linear Actuator providing High Force Density per Unit Area without Position Sensor as a Tactile Cell”IEEJ J.Industry Applications, vol. 7,no .3, pp. 259-265, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_259/_pdf/-char/en

58)Hiroyasu Kobayashi, Keiichiro Kondo, Tetsuya Iwasaki, Akihiro Tsumura”Experimental Study on Increasing Regenerative Power by Improving Regenerative Brake Control of Rail Vehicles in DC-electrified Railways”IEEJ J.Industry Applications, vol. 7,no .3, pp. 266-267, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_266/_pdf/-char/en

59)Jongwon Heo, Keiichiro Kondo”Maximum Continuous Operation Time Control of PMSM with Compressor Loads of Air Conditioners under DC Power Supply Loss”IEEJ J.Industry Applications, vol. 7,no .3, pp. 268-269, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_268/_pdf/-char/en

60)Masahiro Aoyama, Kazukiyo Nakajima, Toshihiko Noguchi”Proposal and Preliminary Experimental Verification of Electrically Reversal Magnetic Pole Type Variable Magnetic Flux PM Motor”IEEJ J.Industry Applications, vol. 7,no .3, pp. 270-281, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_270/_pdf/-char/en

61)Makoto Kanemaru, Mitsuru Tsukima, Toshihiko Miyauchi, Kazufumi Hayashi”Bearing Fault Detection in Induction Machine Based on Stator Current Spectrum Monitoring”IEEJ J.Industry Applications, vol. 7,no .3, pp. 282-288, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_282/_pdf/-char/en

62)Van-Duc Doan, Hiroshi Fujimoto, Takafumi Koseki, Tomio Yasuda, Hiroyuki Kishi, and Toshiyuki Fujita”CSimultaneous Optimization of Speed Profile and Allocation of Wireless Power Transfer System for Autonomous Driving Electric Vehicles,” IEEJ J.Industry Applications, vol. 7,no .2, pp. 189-201, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_189/_pdf/-char/en

63)Muhammad Hazarul Azmeer bin Ab Malek, Hiroaki Kakigano, and Kiyotsugu Takaba”Combined Pulse-Width Modulation of Dual Active Bridge DC-DC Converter to Increase the Efficiency of Bidirectional Power Transfer,”IEEJ J. Industry Applications, vol. 7, no. 2, pp. 166-174, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_166/_pdf/-char/en

64)Naoki Fujieda, Takumi Shinohara, Shuichi Ichikawa, Yuhki Sakaguchi, Shunsuke Matsuoka, and Hideki Kawaguchi”Attenuation Model for Error Correction of Ultrasonic Positioning System,”IEEJ J. Industry Applications, vol. 7, no. 2, pp. 181-188, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_181/_pdf/-char/en

65)Ryo Hanaoka, Takahiro Nozaki, and Toshiyuki Murakami”Translation and Inclination Control for Intelligent Tension Pole Based on Mode Decoupling Method,”IEEJ J. Industry Applications, vol. 7, no. 2, pp. 158-165, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_158/_pdf/-char/en

66)Shuhei Akutsu, Hiromu Sekiguchi, Takahiro Nozaki, and Toshiyuki Murakami”Position and Torque Sensorless Motion Transmission Using Voltage Compensation,”IEEJ J. Industry Applications, vol. 7, no. 2, pp. 150-157, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_150/_pdf/-char/en

67)Yoshihiro Maeda, and Makoto Iwasaki”Feedforward Friction Compensation Using the Rolling Friction Model for Micrometer-stroke Point-to-point Positioning Motion,”IEEJ J. Industry Applications, vol. 7, no. 2, pp. 141-149, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_141/_pdf/-char/en

68)Tom Oomen”Advanced Motion Control for Precision Mechatronics: Control, Identification, and Learning of Complex Systems,”IEEJ J. Industry Applications, vol. 7, no. 2, pp. 127-140, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_127/_pdf/-char/en

69)Hiroshi Nakamura, Kiyoshi Ohishi, Yuki Yokokura, Naoki Kamiya, Toshimasa Miyazaki, and Akifumi Tsukamoto”Force Sensorless Fine Force Control Based on Notch-Type Friction-Free Disturbance Observers,”IEEJ J. Industry Applications, vol. 7, no. 2, pp. 117-126, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_117/_pdf/-char/en

70)Wataru Ohnishi, Hiroshi Fujimoto, Pai-Hsueh Yang, Ping-Wei Chang, Bausan Yuan, Koichi Sakata, and Atsushi Hara”Acoustic Wave Equation Based Modeling and Collocated Side Vibration Cancellation for Pneumatic Cylinder,”IEEJ J. Industry Applications, vol. 7, no. 2, pp. 109-116, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_109/_pdf/-char/en

71)Masayuki Kato, and Katsuhiro Hirata”Characteristic Evaluation of Linear Resonant Actuator Utilizing Electrical Resonance,”IEEJ J. Industry Applications, vol. 7, no. 2, pp. 175-180, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_175/_pdf/-char/en

72)Takahiro Koyama, Kazuhiro Umetani, and Eiji Hiraki”Design Optimization Method for the Load Impedance to Maximize the Output Power in Dual Transmitting Resonator Wireless Power Transfer System,” IEEJ J. Industry Applications, vol. 7, no. 1, pp. 49-55, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_49/_pdf/-char/en

73)Tatsuya Yamamoto, Yinggang Bu, Tsutomu Mizuno, Yutaka Yamaguchi, and Tomoyoshi Kano”Loss Reduction of Transformer for LLC Resonant Converter Using a Magnetoplated Wire,”IEEJ J. Industry Applications, vol. 7, no. 1, pp. 43-48, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_43/_pdf/-char/en

74)Tomohide Shirakawa, Genki Yamasaki, Kazuhiro Umetani, and Eiji Hiraki”Extremum Co-Energy Principle for Analyzing AC Current Distribution in Parallel-Connected Wires of High-Frequency Power Inductors,”IEEJ J. Industry Applications, vol. 7, no. 1, pp. 35-42, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_35/_pdf/-char/en

75)Toru Tanaka, Yoshinori Takahashi, Kenji Natori, and Yukihiko Sato”High-Efficiency Floating Bidirectional Power Flow Controller for Next-Generation DC Power Network,” IEEJ J. Industry Applications, vol. 7, no. 1, pp. 29-34, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_29/_pdf/-char/en

76)Van-Duc Doan, Hiroshi Fujimoto, Takafumi Koseki, Tomio Yasuda, Hiroyuki Kishi, and Toshiyuki Fujita”Iterative Dynamic Programming for Optimal Control Problem with Isoperimetric Constraint and Its Application to Optimal Eco-driving Control of Electric Vehicle,”IEEJ J. Industry Applications, vol. 7, no. 1, pp. 80-92, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_80/_pdf/-char/en

77)Toshiaki Tsuji, Kyo Kutsuzawa, and Sho Sakaino,”Optimized Trajectory Generation based on Model Predictive Control for Turning Over Pancakes,”IEEJ J. Industry Applications, vol. 7, no. 1, pp. 22-28, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_22/_pdf/-char/en

78)Takashi Kai, Hiroyuki Sekiguchi, and Hidetoshi Ikeda”Relative Vibration Suppression in a Positioning Machine Using Acceleration Feedback Control,” IEEJ J. Industry Applications, vol. 7, no. 1, pp. 15-21, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_15/_pdf/-char/en

79)Thao Tran Phuong, Kiyoshi Ohishi, Chowarit Mitsantisuk, Yuki Yokokura, Kouhei Ohnishi, Roberto Oboe, and Asif Sabanovic”Disturbance Observer and Kalman Filter Based Motion Control Realization,” IEEJ J. Industry Applications, vol. 7, no. 1, pp. 1-14, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_1/_pdf/-char/en

80)Hamin Song, and Shinji Doki”Evaluation Method to Estimate Position Control Error in Position Sensorless Control Based on Pattern Matching Method,”IEEJ J. Industry Applications, vol. 7, no. 1, pp. 73-79, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_73/_pdf/-char/en

81)Kazuki Hirono, Reona Hoshino, Tsuyoshi Kamiya, Shinji Wakao, Yoshifumi Okamoto, and Woojin Jeon”Design Optimization of Primary Core in Induction Heating Roll by the Combination of 2D Level-set Method and 3D Coupled Magnetic-Thermal FEM,” IEEJ J. Industry Applications, vol. 7, no. 1, pp. 64-72, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_64/_pdf/-char/en

82)Hiroyuki Kaimori, and Kan Akatsu”Behavior Modeling of Permanent Magnet Synchronous Motors Using Flux Linkages for Coupling with Circuit Simulation, IEEJ J. Industry Applications, vol. 7, no. 1, pp. 56-63, 2018.

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_56/_pdf/-char/en

83)Hiromu Norizuki, and Yutaka Uchimura”Contact Prediction Control for a Teleoperation System with Time Delay,”IEEJ J. Industry Applications, vol. 7, no. 1, pp. 102-108, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_102/_pdf/-char/en

84)Wataru Ohnishi, and Hiroshi Fujimoto”Perfect Tracking Control Method by Multirate Feedforward and State Trajectory Generation based on Time Axis Reversal,”IEEJ J. Industry Applications, vol. 7, no. 1, pp. 93-101, 2018. 

https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_93/_pdf/-char/en

85)Giorgio Lovison, Daita Kobayashi, Motoki Sato, Takehiro Imura, and Yoichi Hori”Secondary-side-only Control for High Efficiency and Desired Power with Two Converters in Wireless Power Transfer Systems,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 473-481, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_473/_pdf

86)Shota Kimura, Kimihiro Nanamori, Taichi Kawakami, Jun Imaoka, and Masayoshi Yamamoto”Allowable Power Analysis and Comparison of High Power Density DC-DC Converters with Integrated Magnetic Components,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 463-472, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_463/_pdf

87)Yichen Zhou, Yonggang Li, and Jiaomin Liu”Complete Models of Transmission-connected Photovoltaic Plant Using Modularity Principle for Power System Small Signal Stability Study,Q”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 435-442, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_435/_pdf

88)Zhang Haifeng, and Wang Peng”Design of an LCC Resonant Converter for Furnace Power Supply during Electron Bean Melting,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 387-394, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_387/_pdf

89)Kichiro Yamamoto, Sho Ehira, and Minoru Ikeda”Synchronous Frame Control for Voltage Sag/Swell Compensator Utilizing Single-Phase Matrix Converter,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 353-361, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_353/_pdf

90)Hideaki Hirahara, Akira Tanaka, Shu Yamamoto, and Takahiro Ara”Systematic Design of Two-Degree-of-Freedom PID Controller for Positioning and Tracking Drives of Linear Servo Motors,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 443-448, 2017. 

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_443/_pdf

91)Yusuke Oki, Tomoyuki Ogawa, and Jun’ichiro Kawaguchi”Train Power Demand Control Using Decentralized and Parallel Control Scheme,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 482-489, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_482/_pdf

92)Hiroya Sugimoto, Itsuki Shimura, and Akira Chiba”Principle and Test Results of Energy-Saving Effect of a Single-Drive Bearingless Motor in Cooling Fan Applications,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 456-462, 2017. 

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_456/_pdf

93)Masafumi Fujita, Takaaki Hirose, Takashi Ueda, Hiroyuki Ishizuka, Masashi Okubo, Ken Nagakura, and Tadashi Tokumasu”Inter-strand Circulating Current Analysis of End-region Transposed Coil of Power Generator using 3D Multi-layer FEM,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 449-455, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_449/_pdf

94)Ufot Ufot Ekong, Mamiko Inamori, and Masayuki Morimoto”Instantaneous Vector Control of Four Switch Three Phase Inverter Fed Induction Motor Drive,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 429-434, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_429/_pdf

95)Thanh Anh Huynh, and Min-Fu Hsieh”Performance Evaluation of Interior Permanent Magnet Motors Using Thin Electrical Steels,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 422-428, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_422/_pdf

96)Takeo Ishikawa, Taiki Watanabe, and Nobuyuki Kurita”Effect of Cleaning Level on Topology Optimization of Permanent Magnet Synchronous Generator,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 416-421, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_416/_pdf

97)Kenta Yamano, Shigeo Morimoto, Masayuki Sanada, and Yukinori Inoue”Design of Surface Permanent Magnet Synchronous Motor Using Design Assist System for PMSM,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 409-415, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_409/_pdf

98)Yuki Shimizu, Shigeo Morimoto, Masayuki Sanada, and Yukinori Inoue”Influence of Permanent Magnet Properties and Arrangement on Performance of IPMSMs for Automotive Applications,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 401-408, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_401/_pdf

99)Hirokatsu Katagiri, Hiroyuki Sano, Kazuki Semba, Noriyo Mimura, and Takashi Yamada”Fast Calculation of AC Copper Loss for High Speed Machines by Zooming Method,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 395-400, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_395/_pdf

100)Shin Kusase, and Kazumi Kurihara”A Proposal for a New Variable Leakage Flux Motor with Interpolar Gap and Permanent Magnets,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 381-386, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_381/_pdf

101)Soumitra Kunte, Mandar Bhawalkar, N. Gopalakrishnan, and Yogesh Nerkar”Optimal Design and Comparative Analysis of Different Configurations of Brushless Doubly Fed Reluctance Machine,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 370-380, 2017. 

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_370/_pdf

102)Katsumi Yamazaki, Ren Suzuki, Motoharu Nuka, and Makoto Masegi”Characteristics Analysis of Claw-Pole Alternator for Automobiles by Nonlinear Magnetic Field Decomposition for Armature Reaction,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 362-369, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_362/_pdf

103)Nicolas Denis, Yenyi Wu, and Keisuke Fujisaki”Impact of the Inverter DC Bus Voltage on the Iron Losses of a Permanent Magnet Synchronous Motor at Constant Speed,””IEEJ J. Industry Applications, vol. 6, no. 6, pp. 346-352, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_346/_pdf

104)Kenta Motoyoshi, Haruyuki Kometani, Nobuyuki Sora, and Susumu Maeda”Large-Scale 3D Electromagnetic Field Analysis for Estimation of Stator End Region Loss in Turbine Generators,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 340-345, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_340/_pdf

105)Aviti Mushi, Sakahisa Nagai, Hidemine Obara, and Atsuo Kawamura”Fast and Robust Nonlinear Deadbeat Current Control for Boost Converter,”IEEJ J. Industry Applications, vol. 6, no. 5, pp. 311-319, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/5/6_311/_pdf

106)Mitsumasa Ushiroda, Takaaki Wakimoto, Hiroaki Yamada, Toshihiko Tanaka, Masayuki Okamoto, and Koji Kawahara”Voltage Rise Suppression and Load Balancing by PV-PCS with Constant DC-Capacitor Voltage-Control-Based Strategy in Single-Phase Three-Wire Distribution Feeders,”IEEJ J. Industry Applications, vol. 6, no. 5, pp. 303-310, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/5/6_303/_pdf

107)Kenta Tsuda, Tomoki Sakuma, Kodai Umeda, Sho Sakaino, and Toshiaki Tsuji”Resonance-suppression Control for Electro-hydrostatic Actuator as Two-inertia System,”IEEJ J. Industry Applications, vol. 6, no. 5, pp. 320-327, 2017. 

https://www.jstage.jst.go.jp/article/ieejjia/6/5/6_320/_pdf

108)Keisuke Kusaka, and Jun-ichi Itoh”Development Trends of Inductive Power Transfer Systems Utilizing Electromagnetic Induction with Focus on Transmission Frequency and Transmission Power,”IEEJ J. Industry Applications, vol. 6, no. 5, pp. 328-339, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/5/6_328/_pdf

109)Yusuke Hayashi, Yoshikatsu Matsugaki, and Tamotsu Ninomiya”Capacitively Isolated Multicell Dc-Dc Transformer or Future Dc Distribution System,”IEEJ J. Industry Applications, vol. 6, no. 4, pp. 268-277, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/4/6_268/_pdf

110)Mohammad Bani Shamseh, Teruo Yoshino, and Atsuo Kawamura”Load Current Distribution between Parallel Inverters based on Capacitor Voltage Control for UPS Applications,”IEEJ J. Industry Applications, vol. 6, no. 4, pp. 258-267, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/4/6_258/_pdf

111)Baptiste Rouzier, and Toshiyuki Murakami”Line Crossing Assistance Based on Situation Modulated Potentials Using Stereo Camera Detection,”IEEJ J. Industry Applications, vol. 6, no. 4, pp. 286-294, 2017. 

https://www.jstage.jst.go.jp/article/ieejjia/6/4/6_286/_pdf

112)Masahide Ito, Kazuyoshi Kawatsu, and Masaaki Shibata”Kinematic Control of Redundant Manipulators for Admitting Joint Range of Motion Maximally,”IEEJ J. Industry Applications, vol. 6, no. 4, pp. 278-285, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/4/6_278/_pdf

113)Yuefei Gao, and Hajime Nobuhara”A Decentralized Trusted Timestamping Based on Blockchains,”IEEJ J. Industry Applications, vol. 6, no. 4, pp. 252-257, 2017. 

https://www.jstage.jst.go.jp/article/ieejjia/6/4/6_252/_pdf

114)Koichiro Iwaoka, and Yuzo Hirotsu”Failure Detection Method using Aggregated Vehicle Detector Data,”IEEJ J. Industry Applications, vol. 6, no. 4, pp. 295-302, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/4/6_295/_pdf

115)Toshiki Nakanishi, and Jun-ichi Itoh,”Design Guidelines of Circuit Parameters for Modular Multilevel Converter with H-bridge Cell”,IEEJ J. Industry Applications, vol.6, no.3, pp.231-244, 2017. 

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_231/_pdf

116)Tomio Sato, Masahide Marumo, and Tetsuya Akitsu,”Lamb-Wave Resonator Oscillator Powered by Inductive Compensation of Stray-Capacitance CMOS Inverter”,IEEJ J. Industry Applications, vol.6, no.3, pp.213-222, 2017. 

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_213/_pdf

117)Hiroshi Shinoda, and Takahide Terada,”Insulated Signal Transmission System with Near-field Resonant Coupler to Drive High-voltage Power Devices”,IEEJ J. Industry Applications, vol.6, no.3, pp. 205-212, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_205/_pdf

118)Hiroki Murata, and Seiichiro Katsura,”Improvement of Operationality Under Time Varying Delay for Bilateral Teleoperation Systems by Differential Signal Based Data Modulation”,IEEJ J. Industry Applications, vol.6, no.3, pp.245-251, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_245/_pdf

119)Sho Sakaino, Hiroyuki Kawajiri, and Toshiaki Tsuji,”Determination of Torque Distribution Ratio for Electric Bicycle with Independently Driven Front and Rear Wheels”,IEEJ J. Industry Applications, vol.6, no.3, pp.223-230, 2017. 

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_223/_pdf

120)Takenori Atsumi,”Estimation Method of Unobservable Oscillations in Sampled-Data Positioning Systems”,IEEJ J. Industry Applications, vol.6, no.3, pp. 199-204,2017. 

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_199/_pdf

121)Hisayoshi Muramatsu, and Seiichiro Katsura,”Design of an Infinite-Order Disturbance Observer Enhancing Disturbance Suppression Performance”,IEEJ J. Industry Applications, vol.6, no.3, pp.192-198, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_192/_pdf

122)Ryota Takahashi, Kiyoshi Ohishi, Yuki Yokokura, Hitoshi Haga, and Tenjiroh Hiwatari,”Stationary Reference Frame Position Sensorless Control Based on Stator Flux Linkage and Sinusoidal Current Tracking Controller for IPMSM”,IEEJ J. Industry Applications, vol.6, no.3, pp.181-191, 2017. 

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_181/_pdf

123)Ryo Tanabe, and Kan Akatsu,”Advanced Torque Control of Permanent Magnet Synchronous Motor Using Finite Element Analysis Based Motor Model with a Real-time Simulator”,IEEJ J. Industry Applications, vol.6, no.3, pp.173-180, 2017. 

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_173/_pdf

124)Kosuke Kondo, and Shinji Doki,”Position Estimation System for PMSM Position Sensorless Control in Inverter Overmodulation Drive”,IEEJ J. Industry Applications, vol.6, no.3, pp.165-172, 2017. 

https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_165/_pdf

125)Duy-Dinh Nguyen, Duc Tuyen Nguyen, and Goro Fujita,”New Modulation Strategy Combining Phase Shift and Frequency Variation for Dual-Active-Bridge Converter”,IEEJ J. Industry Applications, vol.6, no.2, pp.140-150, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_140/_pdf

126)Hiroyuki Kitamura, Sho Sakaino, and Toshiaki Tsuji,”Contact Point Calculation on a Haptic Interface Utilizing Differentiated Force”,IEEJ J. Industry Applications, vol.6, no.2, pp.151-159, 2017. 

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_151/_pdf

127)Takumi Kurosawa, and Yasutaka Fujimoto,”Torque Sensorless Control for an Electric Power Assisted Bicycle with Instantaneous Pedaling Torque Estimation”,IEEJ J. Industry Applications, vol.6, no.2, pp.124-129, 2017. 

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_124/_pdf

128)Yoshiyuki Urakawa,”Lens Position Control System Using Limited Pole Placement Method”,IEEJ J. Industry Applications, vol.6, no.2, pp.117-123, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_117/_pdf

129)Asif ?abanovi?,”Challenges in Motion Control Systems”,IEEJ J. Industry Applications, vol.6, no.2, pp.107-116, 2017. 

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_107/_pdf

130)Noriaki Hirose, and Ryosuke Tajima,”Deadbeat Feedforward Compensation with Frequency Shaping of Position Feedforward Controller”,IEEJ J. Industry Applications, vol.6, no.2, pp.100-106, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_100/_pdf

131)Kisuke Yoshida, Kiyoshi Ohishi, Toshimasa Miyazaki, Yuki Yokokura, and Junichi Fukui,”Full FPGA Tracking Control System Based on Error-Based Communication Disturbance Observer Considering Time Delay for Optical Disc System”,IEEJ J. Industry Applications, vol.6, no.2, pp.91-99, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_91/_pdf

132)Yusuke Asai, Yuki Yokokura, and Kiyoshi Ohishi,”Mechanical Admittance Realization Control Based on Feedforward Compensation for Fine Realization of Impedance”,IEEJ J. Industry Applications, vol.6, no.2, pp.83-90, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_83/_pdf

133)Yoshiaki Seki, Kiyoshi Ohishi, Yuki Yokokura, Toshiki Sano, Yuji Ide, Daigo Kuraishi, and Akihiko Takahashi,”Robust Positioning Control Using α-β Stationary Frame Current Controller and Disturbance Torque Hybrid Observer”,IEEJ J. Industry Applications, vol.6, no.2, pp.73-82, 2017.

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_73/_pdf

134)Sho Masuyama, Takuya Noguchi, and Atsuo Kawamura,”Electromagnetic Linear Actuator with Two Stators and One Rotor for Tactile Display”,IEEJ J. Industry Applications, vol.6, no.2, pp.160-164, 2017. 

https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_160/_pdf